The CW308 UFO Board is a handy main-board for attacking all sorts of embedded targets. Released in 2016, it forms the basis for most of our upcoming target boards. It can be used stand-alone (with an oscilloscope) or with the ChipWhisperer-Capture hardware.== Page Moved ==
== Overview == == Target Board Connectors == == ISee [https:/O Connections == There are two main I/O connection points: the pin headers which duplicate the target board connections, and the 20-pin ChipWhisperer headerrtfm.newae.com/Targets/CW308%20UFO/ NewAE RTFM Page]. The ChipWhisperer header pins (most of the pins previous content on header J5) have diode protection this wiki has been moved to set a maximum voltage levelthe above link. The maximum voltage is set by the voltage present on the middle pin See wiki history if you would like to view exact older versions of J4this page. == Clock Network == === Clock Selection === === Crystal Driver === == Power Distribution == === External Power Sources === === On-Board LDOs === == Programmer Connections == == Jumper Summary == == Schematic ==
