Changes

== ISee [https:/O Connections ==/rtfm.newae.com/Targets/UFO%20Targets/CW308T-AVR/ NewAE RTFM Page] which is now built from the [https://github.com/newaetech/chipwhisperer-target-cw308t GIT Repo].

The pinout of this module matches the "NOTDuino" kit along with the "CW301 Multi-Target Board" routing. The following is the connection between GPIO1-4 and the I/O lines previous content on the AVR: {| class="wikitable"!CW308 Pin!ATMega328P Pin!Notes|-|GPIO1|PD0 (RXD)|Serial INPUT to AVR.|-|GPIO2|PD1 (TXD)|Serial OUTPUT from AVR.|-|GPIO3|N/C||-|GPIO4|PC0|Trigger pin (mapped to ADC-port such that I/O driver power comes from AVCC).|-|CLKIN|XTAL1||-|CLKFB|PB0|Can set this pin as CLKO with fuse. Useful for synchronizing wiki has been moved to internal RC oscillator.|-|nRST|nRST (PC6)|Used by in-system-programming (ISP) interface.|-|MOSI|PB3 (MOSI)|Used by in-system-programming (ISP) interface.|-|MISO|PB4 (MISO)|Used by in-system-programming (ISP) interface.|-|SCK|PB5 (SCK)|Used by in-system-programming (ISP) interface.|} == Programming Header == The 6-pin programming heading can be used with the Atmel ISP interfaceabove link. The pinout See wiki history if you would like to view exact older versions of the 6-pin programming header on the main-board allows it to work with standard Atmel ISP tools: [[File:avr_isp.jpg|400px]] == Schematic == [[File:CW308T_AVR_Schematic_Page_1.png|1000px]] [[File:CW308T_AVR_Schematic_Page_2this page.png|1000px]]  {{Template:Hardware}}[[Category:Targets]][[Category:CW308 Targets]]